Related topics

SCSI 1 and 2 disks on the same controller
I have a series 8590 with a cached (512K - latest revision) IBM SCSI controller for it. I have just purchased a cable to go with it. Now I am wondering about networking it to my Amiga BBS via the SCSI cable. The Amiga's Controller cannot change its ID, but the IBM one can. What I want to know is can you change the

Which SCSI controller to buy and is RAID 0 that much faster?
David .. thunderbol...@hotmail.com comp os linux setup Jaco van Staden wrote: All I am trying to install RH 6.2 on a IBM PC 330 Server which uses an Adaptec SCSI controller and an IBM ServeRaid Raid controller. It seems as if the SCSI controller driver is not loaded correctly. Problem: I boot from the CD and after

SCSI controller -1, external SCSI disks
If the error occurred at the initial setup of the system, the system might have been installed on an unsupported disk or SCSI controller. Some controllers are supported only by drivers that are in the Windows Driver Library (WDL), which requires the user to do a custom installation. If Setup autodetected the

Adaptec 19160 SCSI controller configuration error: 02
Ron Reaugh Ron-Rea...@worldnet.att.net comp periphs scsi Kenneth Rogers <ksrog...@erols.com> wrote in article <354ED22D.2...@erols.com>... tdean wrote: I currently have a pci with an adaptec 2920 that has an external exabyte tape drive. I am wanting to put another scsi controller that will have an internal hdd

SCSI Controller Swap Problem - 0x0000007B Inacessible Boot Device
Is it impossible to share an IRQ between a HPT366 UDMA66 onboard-controller and a SCSI-II controller ? My problem: The HPT366 controller (onboard my Abit BE6 motherboard) uses IRQ 15 for both channels (primary & secondary). I tried to install a new SCSI-II pci-card (Adaptec AVA-2904CD), manually selecting a free

SINGLE ENDED SCSI CONTROLLER
6.0 On-board serial ports: 2 On-board bi-directional parallel port Main Memory Size: 224 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0 Integral SCSI Controller 1 Integral SCSI Controller 0 Disk drive: unit 2 on Controller 0 Disk drive: unit 1 on Controller 0 Graphics board: GUI-Extreme u7 - Indigo 2 (green)

Help: toshiba scsi bad? buslogic controller etc...
My old UW-SCSI controller died so I'm left with a pair of UW drives and a spare old ISA controller that's only 50pin, AHA-1520 I think, which came with my scanner or something. The thing I'm wondering about is, is it possible to use the 68pin UW drives with the 50-pin AHA-1520? The thing is because my UW card came

SCSI Controller Peformance
All non-HD gadgets on a high performance workstation should be SCSI and connected to a PCI busmastering SCSI controller. And frequently not on the same SCSI channel as high performance UW SCSI HDs. It's very difficult to have any external devices on the same SCSI channel as internal UW HDs. Regards, Ron Reaugh.

New SCSI Controller -- won't boot from drive(s)
Greg Tallent gr...@mcn.org comp sys amiga marketplace On 20-Aug-97 16:15:51 Alex Howell al...@noc.tor.hookup.net Wrote: I'm looking to either get a new rom(s) for my ALF3 controller or get another one that has later roms, or ANY SCSI controller that fits on the side car slot of the A500 and works with SCSI 2

VAXStation 3500 crash with new CMD SCSI controller
I am having a problem this quad processor server, well not the actual server per se, but the SCSI and RAID controllers. They are not playing nicely with my 8 new Seagate Barracuda SC19171WC 9.1gb harddrives. The SCSI controller is a Symbios 22801 Ultra II, and the RAID controller is an old Mylex DAC960PD whos prom

SCSI controller problems
When prompted, give setup the correct driver for your SCSI controller and perform an UPGRADE installation. The upgrade will run NTDETECT and allow all of the proper drivers to load, including video and NIC drivers (which are likely to be different). Once you’re finished with the upgrade, you should be able to boot

AL440LX, Win 95, lockups if SCSI controller is ENABLED!!!??
Kenneth D. Merry k...@kdm.org fa freebsd scsi On Fri, May 26, 2000 at 15:49:01 -0400, George Morgan wrote: I'm going to recommend a particular scsi controller (or controllers) to a friend of mine and wanted to get some advice. Unfortunately the machine will probably be multiple booting some version of Windows (98 or

Installation fails for Adaptec (AIC7880) SCSI Controller
2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 2 on SCSI controller 0 (unit 2) Disk drive: unit 3 on SCSI controller 0 (unit 3) (XVM Local Disk) (primary path) Disk drive: unit 4 on SCSI controller 0 (unit 4) (XVM Local Disk) (primary path) Disk drive: unit 5 on SCSI controller 0

SCSI controller card for IBM PS/2 P75 Type 8573
(J) IDE CD-ROM and Zip drives are H & I, SCSI ID's are 0,1,2,3,7(controller),8,10. Boot disk is device -0-. Here is the problem. Brand new installation of Windows 95 as the original crashed and had to rebuild from scratch. System worked fine before without problems. I lost a couple of years worth of work in created

SCSI controller specs and formatting
Designing a third party SCSI controller that would cache even more tape data, would cause even more virtually unsolvable problems. In the past I found that most tape backup programs are not very efficient. Most are single threaded, IE Lack the ability to make simultaneous disk reads/tape writes.

Disable Amiga 3000T Scsi Controller
"Kenneth D. Merry" k...@kdm.org mailing freebsd scsi On Fri, May 26, 2000 at 15:49:01 -0400, George Morgan wrote: I'm going to recommend a particular scsi controller (or controllers) to a friend of mine and wanted to get some advice. Unfortunately the machine will probably be multiple booting some version of Windows

second scsi controller
After I changed from Win95 to Win98 and before I reinstalled the scannner, I installed a SCSI controller (Adaptec SCSI Card 2940UW). This works perfectly with my read/write cd-drive, which is the only hardware on my SCSI controller. In Device Manager, the scanner is represented under "SCSI Controllers" with the

PAS-16 == SCSI Controller?
AMI 80386/25MHz no cache, or FPU 8mb Memory Adaptec ESDI Floppy/Hard Controller Western Digitial Paradise VGA Card Two 338mb CDC ESDI drives setup as type 47 (User defined type) with 1222 cyls, 15hds, 36 sec/trk and of course, an Adaptec 1540B SCSI controller with an archive viper 150s attached internally at ID 6.

Suspend with SCSI Controller
I like the Plextor a lot and want to update the aspi drivers (1.0) to current but i already removed my scsi controller. i am physically unable to re-install the scsi controller and the adaptec aspi update util refuses to update the drivers without a scsi controller please help - i think this is the cause of plextor

Plextor-Updating Aspi drivers with no SCSI controller- help
COM comp periphs comp periphs scsi alt comp periphs soundcard sblive nl comp hardware huibe...@email.com wrote: I hope you can help me out with the following problem: When installing my SB Live! Value my scsi-controller (NCR810 pci) which resides on irq11 conflicts in W98. Initially the Live also went to irq 11,