Related topics

2nd SCSI Controller on Indy ??
Only problem is I have a 4091 scsi card and Cyberstorm PPC scsi controller on board.So I have no need for the slow motherboard scsi(Which I was told was the terrible slow 2091 controller built on the motherboard. Well, yes and no. The A3000's built-in SCSI uses the same Western Digital SCSI-1 chip as the A2090 and

Using IDE Controller for CD-ROM in a SCSI system?
Alexis Cousein a...@brussels.sgi.com comp sys sgi hardware Alexander Schleiffer wrote: Integral SCSI controller 3: Version QL1040B (rev. 2), differential Disk drive: unit 3 on SCSI controller 3 Disk drive: unit 4 on SCSI controller 3 Disk drive: unit 5 on SCSI controller 3 Disk drive: unit 1 on SCSI controller -1

How to disable SCSI controller?
2), single ended Integral SCSI controller 8: Version QL1040B (rev. 2), single ended Integral SCSI controller 6: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 6 Disk drive: unit 2 on SCSI controller 6 Disk drive: unit 4 on SCSI controller 6 Disk drive: unit 5 on SCSI controller 6

FS: All sorts of SCSI controller and cables(updated Nov.20)
Unable to allocate IRQ for adaptec controller. "MN> .scsi1 : Adaptec 174x (EISA) "MN> .scsi : 2 hosts. "MN> . Vendor: QUANTUM Model: FIREBALL540S Rev: 1Q04 "MN> . Type: Direct-Access ANSI SCSI revision: 02 "MN> .Detected scsi disk sdb at scsi1, channel 0, id 0, lun 0 "MN> . Vendor: QUANTUM Model: FIREBALL540S Rev:

kern/56973: SCSI errors from on-board Adaptec (AIC7xxx) controller
The generic kernel will find the new controller and doconfig will add the appropriate lines for it. Copy the new kernel when done and reboot. SCSI devices are relatively simple and if you know the right base device name adding a new one by hand isn't hard. All the information you need is in the GENERIC

if I connect scsi HD to scsi controller while boot asks PRESS ...
Well SCSI is SCSI, and Promise is Promise! Apples and Oranges. To WINDOWS the Promise card appears to be a SCSI controller. It does the same for the real SCSI controller. C is meant to be the legacy (inbuild) IDE controller first detected drive but any bootable drive also becomes C: if so detected.

What is faster for SCSI? MCS700 or IBM cache controller
Here is my situation: I used to have an Adaptech 2940U SCSI controller (8 bit wide) connected to a Seagate 15150W SCSI drive (16 bit wide) via a converter. The performance is adequate. Recently i swicthed to a DTC 3130BW SCSI controller (16 bit wide, chip set 53c875) and the Seagate drive is now connected directly

Boot problem with three SCSI-Controller in one system.
Tony Hwang drago...@shaw.ca alt comp periphs mainboard asus Hi, You need BIOS for the controller and driver for the drives. Installed driver? What is Ultra ATA scsi controller? Ultra ATA is evolution of IDE intereface and SCSI is quite different interface. Ultra ATA drive is treated as SCSI drive but they're not

scsi controller bios conflict with asus v733kt mb
I cannot disable my SCSI controller! I tried to disable it in the BIOS, then the SCSI BIOS won't show up while booting(Those asking for C+A to config SCSI). Did you actually disable the controller in the BIOS, or did you simply disable "SCSI BIOS"? But when I boot linux, SCSI controller is detected by kernel and

Help attaching a CD-ROM to AVA-1502 (Zip's SCSI controller)
... Mbytes Integral SCSI controller 0: Version WD33C95A, single ended, revision 0 Integral SCSI controller 1: Version WD33C95A, differential, revision 0 Disk drive: unit 1 on SCSI controller 1 (unit 1) Disk drive: unit 2 on SCSI controller 1 (unit 2) Disk drive: unit 3 on SCSI controller 1 (unit 3) Disk drive: unit

SGI Challenge L Server (Ebay)
Also, the user who said you can disable the Buz's SCSI is incorrect. There is no option to disable the Buz's SCSI BIOS in the card's setup utility. Regards, Frank Subject: BUZ & SCSI Controller - Question From: writer <deuxieme...@bitsmart.com> Date: 3/11/98 6:05 AM Pacific Standard Time Message-id: <35069A1E.

Secondary Adaptec SCSI controller on ISC v2.2
John Johnson txjoh...@ix.netcom.com comp sys ibm pc hardware misc comp sys ibm pc hardware storage comp sys ibm pc hardware systems comp sys ibm pc misc comp sys ibm ps2 hardware In <361D68D1.7BCD0...@home.com> Mikka <pblo...@home.com> writes: John Johnson wrote: This PC has a SCSI controller on the system board

How to disable SCSI controller?
Most SCSI cards ship with IRQ=11 as the factory default. Since the Microtek software and Microsoft OS's like to see the 1502 on IRQ=11, you may need to change the IRQ setting on your built-in SCSI controller. I'm not familiar with your motherboard, but this setting is probably accomplished through the BIOS or a

Adaptec 19160 SCSI controller configuration error: 02
Note that the SCSI cards that are bundled with scanners, CDROMs, etc. are generally cheap & dumb cards (no on-board CPU to control the SCSI bus). However, you could pay around $200-$600 for a "good" SCSI controller with drivers (note that you can pay less for just the SCSI card alone but, without drivers,

Bad Termination SCSI Advice? Was: Scanner/Controller ...
Hello, I am wondering if an ultra-scsi drive (the IBM DCAS 4.3GB) will perform better on an ultra controller than on my current NCR810 fast-scsi controller. I'm talking about actual disk speed, not combined thruput resulting in the higher ultra-scsi bandwidth. One DCAS will work ok on a fast narrow SCSI channel

Disable Amiga 3000T Scsi Controller
Josip Rodin j...@cibalia.gkvk.hr debian bugs dist Package: kernel-image-2.2.18pre21 Version: whichever's in potato r0 Hi, I tried to install Debian on a machine with the controller from subject, but it wouldn't boot. It hanged after displaying the first few general information messages on what controller it

Low-level formatting after changing SCSI controller?
I have an NT 4.0 server that had two SCSI controllers, one for a Tape Drive and one for the CD-ROM drive. I had to use two because the tape drive does not want any other scsi devices on the same controller as itself. Anyway last week the CD-ROM's SCSI controller started failing (lock ups) at boot,

Need advice on what motherboard to pick (and SCSI controller + ...
SimMike simm...@uswest.net comp sys ibm pc hardware storage My CD-R came with a cheapo ISA SCSI controller. I have never used this device. I hooked the CDR up to my existing PCI SCSI controller and never looked back. Chances are the included SCSI controller is a cheapo. If it is PCI, you might be able to sell it to

BUZ & SCSI Controller - Question
<https://www.can.ibm.com/parts/catalogue/mobile/mobp75.htm> This PC has a SCSI controller on the system board and has two 32-bit full length MCA bus slots and two 16-bit half length MCA bus slots. The hard disk is a 400 MB 50-pins SCSI disk. In addition, I have some IBM SCSI-2 2GB 50-pins hard disks (0664-M1H)

SCSI Controller Card for IBM PS/2 P75 Type 8573
<br> <br> So I took your advise, removed the SCSI controller, disabled the printer &amp; ttyb (?). Still locks <br> when I access the internal modem via tip. I have attached the new dmesg.log. (And I would be<br> interested in knowing how one controls interrupts, etc, assigned to these "PnP" cards)<br> <br> Sorry I